Nansulate Tank Insulation for Ethanol Tanks, Methanol Tanks, Water Tanks, Fuel Holding Tanks and Concrete Tanks

Nansulate Energy Saving and Asset Protection Coatings

Nansulate® Tank Insulation Coatings

Insulates Tanks Effectively and Prevents Corrosion
Industry Leading Asset Protection

Real Savings - Short Payback

patented technology

Nansulate Tank Insulation Coatings

Nansulate® Industrial Coatings are cost effective, easy to apply and provide the best solution for corrosion under insulation on tanks. Exterior tank insulation that will stand up to weathering. Rain, snow, intense sunlight - it can handle them all and keep performing!

Superior thermal insulation performance

Excellent corrosion prevention

Cost effective and easy to apply with sprayer, brush or roller

Reduces surface temperature of hot tanks

Clear coating allows visual inspection of underlying surface

Extremely durable in outdoor and extreme environments

Low VOC, water-based, non-toxic, non-flammable

Epoxy version is chemical and flame resistant

No cladding required

Is not damaged by fire sprinker activation or rain

Consistent performance throughout life span, retains insulating value

UV resistant, moisture resistant

Applications

	Tank and Fuel Oil Storage Tank Insulation: Nansulate® can offer energy savings when used as tank insulation in a number of ways. It will insulate and protect against corrosion, as well as allow your tank process to run more effectively by keeping the heat inside.
	Food and Beverage Tanks: Nansulate® Translucent GP has received the NSF non-food compound registration, making it an ideal product to use for insulating pipes and tanks used in food and beverage manufacturing. Nansulate®'s proven effectiveness not only saves energy use but also provides a more consistent insulation, making food and beverage heating processes more efficient.
	Pipe Insulation: Nansulate® Translucent High Heat is an excellent insulation for steam pipes and water pipes that are connected to tanks. It can be applied on using a misting method application without downtime. It provides personnel protection from burns by lowering surface temperatures and elinates problems with humidity causing othe insulation to deteriorate. It provides the perfect CUI protection with its combination of corrosion resistance and insulation.
	Concrete Digester Tank Insulation: Nansulate® coatings provide an effective insulation for concrete tanks of all types, including waste digester tanks which can be used as part of a heat recapturing or CHP system. The coatings stand up extremely well to harsh environments and are easily spray applied to exterior concrete tank surfaces.
	Hot Water Tank and Pipe Insulation: Nansulate® PT is extremely effective as a hot water tank insulation and hot water pipe insulation and will reduce heat loss from pipes and tanks, saving you money on your water heating costs. It can be used on metal or plastic hot water heater tanks and pipes, and will provide thermal insulation without adding bulk. The clear coat insulation provides invisible protection and saves energy.
	Sugar Tank and Vessel Insulation: Reduce thermal heat loss and insulate many types of sugar tank equipment, including melters, raw sugar melt receiving tanks, crop syrup tanks, recovery feed mixers, crop massecuite receivers, crop runn off tanks, supply tanks, liquor tanks, slidge tanks, water tanks, filter acid treatment tanks, quency tanks, drainage hoppers, precoat mising tanks, product strike receivers, and wash water tanks. Nansulate® coatings stand up extremely well to outdoor enviroments and are resistant to weathering. They retain insulating performance over time due to their ability to resist water infiltration. An excellent insulation and corrosion prevention coating for any outdoor or extreme environment.
	Asphalt Tank and Equipment Insulation: Nansulate® High Heat and EPX are extremely effective for insulating ashalt tanks, asphalt silos, and asphalt drying drums, to reduce heat loss and energy costs. Keeping asphalt at the proper temperature both during production and at the final job site is necessary to ensure integrity of the application, and insulating with a thin film coating can be done easily with a spray application on the exterior of the equipment. The coatings also stand up well to weathering and extreme environments, making them the perfect solution for asphalt equipment insulation.

Nansulate Translucent High Heat thermal insulation and corrosion prevention coating

Product Data Sheet
Application Handbook
MSDS

Nansulate® Translucent High Heat
High Performance Protective Thermal Insulation & Corrosion Prevention Coating

Temperature Extremes: -40F to 400F (-40C to 204C)

Direct to metal - apply over a variety of metal surfaces, such as steel, stainless steel, copper, and more.

Coverage Rate per Gallon:
450 S.F. @ 1 coat (each coat applied at 3-5 wet mils)
45 S.F. @ 10 coats (typical application)
Actual coverage rate may vary depending on surface texture.

$89.95 - 1 gallon
$449.75 - 5 gallon

plus shipping

Nansulate Translucent PT thermal insulation and corrosion prevention coating

Product Cut Sheet
Application Handbook
MSDS

Nansulate® Translucent PT
High Performance Protective Thermal Insulation & Corrosion Prevention Coating

Temperature Extremes: -40F to 257F (-40C to 125C)

Direct to metal - apply over a variety of metal surfaces, such as steel, stainless steel, copper, and more.

Coverage Rate per Gallon:
450 S.F. @ 1 coat (each coat applied at 3-5 wet mils)
75 S.F. @ 6 coats (typical application)
Actual coverage rate may vary depending on surface texture.

$79.95 - 1 gallon
$399.75 - 5 gallon

plus shipping

Member

Nansulate® is Patented technology protected by U.S. and international Patents.

© Copyright 2011 Industrial Nanotech, Inc. All Rights Reserved. Nansulate® is a registered trademark of Industrial Nanotech, Inc.
For more information Contact Us.- Read our Privacy Policy
Menu by Apycom jQuery Menus

Read about Nansulate® in Biofuels International Magazine

Read about Nansulate® in Asia Pacific Coatings Journal

Read about Nansulate® in Ethanol Producter Magazine

Smart Fuels

Feature Customer Application
Smart Fuels, LLC

Smart Fuels, LLC is a leading alternative energy company headquartered in Boston, that refines bio-diesel and related co-products from a variety of feedstocks, such as animal-derived fats and vegetable-based oils.

Smart Fuels choose Nansulate® Translucent PT coating to insulate and protect new fuel storage tanks being installed at their facility in Fruitland Park, Florida. They also applied Nansulate® High Heat to facility steam lines to reduce heat loss and corrosion.

Nansulate coatings are Made in the USA