Nansulate HomeProtect Home Insulation Coatings to Insulate Walls, Attics, Ceilings and more

Roll-On Insulation - that Saves You Money on Your Monthly Energy Bills

Nansulate® HomeProtect
Insulation & Mold Resistant Coatings
Do It Yourself - Available in Clear or White
Buy it today and save on your next energy bill!

Nansulate HomeProtect Insulation and Mold Resistant Coatings

Effective and affordable insulation for every room in your home. Nansulate® is applied like a paint, but is much more. It is a nanotechnology based coating which provides long-term insulation and mold resistance for your home.

Customers typically report 20%-40% energy savings

Only 44 cents per s.f.

Easy Application with brush, roller or paint sprayer.

Non-toxic, water-based & earth friendly

Improves air quality by protecting against mold and moisture

10 Reasons to Consider Nansulate® Home Insulation

Decrease heating and cooling costs - spend less each month on your energy bill
Insulation by means of low thermal conduction - Because Nansulate® has a low thermal conductivity (meaning that it doesn't transfer heat energy well), it can insulate in a thin layer and offers a versatile insulation that can be used on walls, celiings, ductwork, brick, wood, stucco and many other surfaces
Non-toxic, and safe for use in your home, low VOC
No special equipment needed to apply - spray on coating - Application instructions
Clear Coat allows an invisible layer over wood, drywall, pre-painted walls, cement, brick, and more
Long-term consistent protection - does not get infiltrated by moisture, dust, mold
Make your home safer - Residential insulation that also protects against surface growth of mold without use of harmful moldicides
Improve Air Quality - Nansulate® does not harbor infestion by mold, rodents, insects, or moisture - meaning that your family is safer and your home has better air quality.
Return on investment is generally seen in less than a year, as reported by our customers
Apply at your own speed - do One Room at A Time, and spread your application out to best suit your home insulation needs

What Our Customers Say:

"I just wanted to write and thank you for recommending the Nansulate Home Protect coating for the second story of my home. As you recall our 2nd story has no forced heat, it is a gravity heat, prior to the application of Nansulate we had to wait 30 minutes for our bedroom to heat up with our heater, now its around 10 to 15 minutes amazing and its even colder outside than it was before. This coating has made a substantial difference in the warmth and comfort of my home. I am sure this product will pay for itself in no time, as you had said. I will definitely recommend your company and products to other people for it has remarkably proven itself worthy."

Thanks Again,
Kim Newman
Linden, MI

Read more testimonials

Nansulate reduces thermal flow by 34.8 percent

Standard Test Method for Steady-State Thermal Performance of Building Assemblies
(UNI EN ISO 8990:1999 - similar to ASTM C236)
Results:
Thermal flow, measured in watts, through the wall section coated with Nansulate® was reduced by 34.80%

Thermal resistance (1/U), measured in m2*k*w1, of the wall section coated with Nansulate® was increased by 28.98%

Customer Example

ENERGY USE IN KILOWATT HOURS
(Customer in Tulsa Oklahoma)

Reduced Energy Use with Nansulate HomeProtect Coatings

Average Energy Savings - 42%

Click here to download this case study

------------------------------------------------------------------------------

Benfits of Nansulate® Home Protect Coatings:

Outstanding insulation properties for a thin film coating
Does not contain any potentially harmful anti-microbial additives or biocides
Resistant to existing molds as well as resistant to new molds
Easy Application with brush, roller or paint sprayer.
Non-hazardous, water-based
Color: Translucent finish (ClearCoat) and White Semi-Gloss Finish (White Interior)
It exhibits outstanding durability with excellent adhesion to fiberglass, pvc, wood, concrete, plastic and many more substrates.
Energy Savings - a cost effective way to save money on your energy & fuel bills.
Resists Mold and Moisture
Space Saving – each coat is applied at 3-5 wet mils; a full three-coat application will dry to 4.5-7.5 dry mils.
Easy Cleanup – soap and water
Green Building Product - low VOC paint
Low Installation Cost - approx. 44 cents per S.F.
Do it yourself – easily applied by maintenance crews or individuals.
Equally suited for Commercial and Home Insulation Use.

Nansulate® HomeProtect ClearCoat has a clear, matte finish, and can be applied to a variety of exterior and interior surfaces. HomeProtect is non-toxic and does not contain any potentially harmful anti-fungal agents. HomeProtect Clear Coat has a higher insulating ability than HomeProtect White.

Coverage Rate: 150 S.F. per gallon @ 3 coats (recommended coverage). Actual coverage rate may vary depending on surface texture

Dowload Application Instructions

Download Specification Sheet

Price: $65.95 US per 1 gallon / $329.75 US per 5 gallon - plus shipping
(Click button below to purchase. You can adjust quantity in the cart)

HomeProtect White Interior Nansulate® HomeProtect White has a white, semi-gloss finish which can be applied to interior walls, ceilings and attics. HomeProtect is non-toxic and does not containt any potentially harmful anti-fungal agents. HomeProtect White can be tinted to your desired color.

Coverage Rate: 150 S.F. per gallon @ 3 coats (recommended coverage). Actual coverage rate may vary depending on surface texture

Download Application Instructions

Download Specification Sheet

Price: $65.95 US per 1 gallon / $329.75 US per 5 gallon - plus shipping
(Click button below to purchase. You can adjust quantity in the cart)

Easily applied over pre-painted surfaces	Use on wood, stucco, drywall and more	Add an invisible thermal barrier to any home

*20%-40% based upon field studies, testing and customer feedback

Nansulate® is Patented technology protected by U.S. and international Patents.