 |
 |
 |
|
||
 |
|
 |
|
||
Quick Tip: Make Your Blinds Energy Efficient with Nansulate®
Nansulate® HomeProtect Insulation Coatings
Lower your energy bills with next generation insulation
Do It Yourself - Clear, matte finish
Paint on walls, ceilings, attics - over wood, concrete, pre-painted walls, stucco, drywall and more
Patented technology
Nansulate® is a patented nanotechnology based coating that provides long-term insulation and mold resistance for walls and ceilings. Application is as easy as painting, so you can do it yourself and save. |
|
Customers typically report 20%-40% energy savings
 |
 |
 |
 |
8 Reasons to Consider Nansulate® Home Insulation
-
Decrease heating and cooling costs - spend less each month on your energy bill!
-
Insulation effectively and for long-term - Because Nansulate® insulates by inhibiting the conduction of heat, it can insulate in a durable, thin layer that isn't infiltrated by mold, moisture or other contaminates.
-
Non-toxic, and safe for use in your home, low VOC
-
No special equipment needed - apply with paint sprayer, brush or roller- Application instructions
-
Clear Coat allows an invisible layer over wood, drywall, pre-painted walls, cement, brick, and more
-
Improve Air Quality - Nansulate® residential insulation is resistant to mold and moisture and does not harbor infestion by rodents or insects. View "What's lurking inside your insulation" gallery.
-
Proven effective by independent laboratory and government testing. Visit our test data page.
-
Apply at your own speed - Insulate One Room at A Time, and spread your application out to best suit your home insulation needs
Standard Test Method for Steady-State Thermal Performance of Building Assemblies
(UNI EN ISO 8990:1999 - similar to ASTM C236)
Results:
Thermal flow, measured in watts, through the wall section coated with Nansulate® was reduced by 34.80%
Thermal resistance (1/U), measured in m2*k*w1, of the wall section coated with Nansulate® was increased by 28.98%
Customer Example
ENERGY USE IN KILOWATT HOURS
(Customer in Tulsa Oklahoma)
Average Energy Savings - 46%
Click here to download this case study
Nansulate® HomeProtect ClearCoat has a clear, matte finish, and can be applied to a variety of exterior and interior surfaces. HomeProtect is non-toxic and does not contain any potentially harmful anti-fungal agents. HomeProtect Clear Coat has a higher insulating ability than HomeProtect White.
Coverage Rate: 150 S.F. per gallon @ 3 coats (recommended coverage). Actual coverage rate may vary depending on surface texture
Dowload Application Instructions
PRICE:
$74.95 per gallon
$59.95 per gallon
(Qty of 11+ gallons)
$74.95 per gallon
$64.95 per gallon
(Qty of 6-10 gallons)
$74.95 per gallon
$69.95 per gallon
(Qty of 1-5 gallons)
plus shipping
(Click button below to purchase. You can adjust quantity in the cart)
 |
 |
Please note: Nansulate® HomeProtect White has been discontinued. We apologize for any inconvenience, and invite HomeProtect White users to try HomeProtect Clear Coat, which has a higher insulating ability, and can easily be coated over or under a water-based color paint if desired.
Easily applied over pre-painted surfaces |
Use on wood, stucco, drywall and more |
Add an invisible thermal barrier to any home |
 |
 |
 |
See more application photos in our Photo Gallery
*20%-40% based upon field studies, testing and customer feedback
Nansulate® is Patented technology protected by U.S. and international Patents.
© Copyright 2009 Industrial Nanotech, Inc. All Rights Reserved. Nansulate® is a registered trademark of Industrial Nanotech, Inc.
For more information Contact Us.- Read our Privacy Policy
Try Nansulate® now and join those who have saved...
Customer: Gary Davis
Location: Tulsa, Oklahoma
Monthly avg. savings: $61.00
Annual avg. savings: $427.00
Download case study
Customer: Homeowner
Location: Connecticut
Monthly avg. savings: $55.46
Annual avg. savings: $665.56
Download case study
"I keep a careful spreadsheet of heating expenses and even though this has been a long and cold winter, I have used about 20% less than last year. Take in to account that I decided to keep the house 2 degrees warmer during the day and 4 degrees warmer at night!" -Evelyne Tinkl, Mohnton, Pennsylvania
"We are really pleased with the 40% savings in energy cost and the swiftness at which it (the house) cools off and heats up. I tell my friends about it because it really works. You could heat that house with a votive candle and a blow dryer now that it has the nanotech coating on it."
HomeProtect Clear Coat - clear, matte finish, and can be applied to a variety of exterior and interior surfaces.
PRICE:
$74.95 per gallon
$59.95 per gallon
(Qty of 11+ gallons)
$74.95 per gallon
$64.95 per gallon
(Qty of 6-10 gallons)
$74.95 per gallon
$69.95 per gallon
(Qty of 1-5 gallons)
plus shipping
