Nansulate HomeProtect Home Insulation Coatings to Insulate Walls, Attics, Ceilings and more

Nansulate Energy Saving and Asset Protection Coatings



Join our FREE Email Newsletter - Receive monthly coupons, energy saving news and more Email:

Purchase in increments of $35, $50, $75 or $100. Your gift certicate will arrive in a holiday card and a NanoPioneer mug or magnet.

Quick Tip: Make Your Blinds Energy Efficient with Nansulate®

Customer Appreciation Sale

Nansulate® HomeProtect Insulation Coatings
Lower your energy bills with next generation insulation
Do It Yourself - Clear, matte finish
Paint on walls, ceilings, attics - over wood, concrete, pre-painted walls, stucco, drywall and more

Patented technology

Nansulate HomeProtect Insulation and Mold Resistant Coatings

Nansulate® is a patented nanotechnology based coating that provides long-term insulation and mold resistance for walls and ceilings. Application is as easy as painting, so you can do it yourself and save.

Customers typically report 20%-40% energy savings

Easy Application with brush, roller or paint sprayer.

Non-toxic, water-based & earth friendly

Insulates and reduces heating and cooling costs

5+ years of proven effectiveness and energy savings worldwide.

8 Reasons to Consider Nansulate® Home Insulation

Decrease heating and cooling costs - spend less each month on your energy bill!
Insulation effectively and for long-term - Because Nansulate® insulates by inhibiting the conduction of heat, it can insulate in a durable, thin layer that isn't infiltrated by mold, moisture or other contaminates.
Non-toxic, and safe for use in your home, low VOC
No special equipment needed - apply with paint sprayer, brush or roller- Application instructions
Clear Coat allows an invisible layer over wood, drywall, pre-painted walls, cement, brick, and more
Improve Air Quality - Nansulate® residential insulation is resistant to mold and moisture and does not harbor infestion by rodents or insects. View "What's lurking inside your insulation" gallery.
Proven effective by independent laboratory and government testing. Visit our test data page.
Apply at your own speed - Insulate One Room at A Time, and spread your application out to best suit your home insulation needs

Nansulate reduces thermal flow by 34.8 percent

Standard Test Method for Steady-State Thermal Performance of Building Assemblies
(UNI EN ISO 8990:1999 - similar to ASTM C236)
Results:
Thermal flow, measured in watts, through the wall section coated with Nansulate® was reduced by 34.80%

Thermal resistance (1/U), measured in m2*k*w1, of the wall section coated with Nansulate® was increased by 28.98%

Customer Example

ENERGY USE IN KILOWATT HOURS
(Customer in Tulsa Oklahoma)

Reduced Energy Use with Nansulate HomeProtect Coatings

Average Energy Savings - 46%

Click here to download this case study

Nansulate® HomeProtect ClearCoat has a clear, matte finish, and can be applied to a variety of exterior and interior surfaces. HomeProtect is non-toxic and does not contain any potentially harmful anti-fungal agents. HomeProtect Clear Coat has a higher insulating ability than HomeProtect White.

Coverage Rate: 150 S.F. per gallon @ 3 coats (recommended coverage). Actual coverage rate may vary depending on surface texture

Dowload Application Instructions

Download Specification Sheet

PRICE:

~~$74.95 per gallon~~
$59.95 per gallon
(Qty of 11+ gallons)

~~$74.95 per gallon~~
$64.95 per gallon
(Qty of 6-10 gallons)

~~$74.95 per gallon~~
$69.95 per gallon
(Qty of 1-5 gallons)

plus shipping

(Click button below to purchase. You can adjust quantity in the cart)

Please note: Nansulate® HomeProtect White has been discontinued. We apologize for any inconvenience, and invite HomeProtect White users to try HomeProtect Clear Coat, which has a higher insulating ability, and can easily be coated over or under a water-based color paint if desired.

Easily applied over pre-painted surfaces	Use on wood, stucco, drywall and more	Add an invisible thermal barrier to any home

See more application photos in our Photo Gallery

*20%-40% based upon field studies, testing and customer feedback

Nansulate® is Patented technology protected by U.S. and international Patents.

Try Nansulate® now and join those who have saved...

Customer: Gary Davis
Location: Tulsa, Oklahoma
Monthly avg. savings: $61.00
Annual avg. savings: $427.00
Download case study

Customer: Homeowner
Location: Connecticut
Monthly avg. savings: $55.46
Annual avg. savings: $665.56
Download case study

"I keep a careful spreadsheet of heating expenses and even though this has been a long and cold winter, I have used about 20% less than last year. Take in to account that I decided to keep the house 2 degrees warmer during the day and 4 degrees warmer at night!" -Evelyne Tinkl, Mohnton, Pennsylvania

"We are really pleased with the 40% savings in energy cost and the swiftness at which it (the house) cools off and heats up. I tell my friends about it because it really works. You could heat that house with a votive candle and a blow dryer now that it has the nanotech coating on it." - Marc Izzard, Truth or Consequences, New Mexico