Nansulate Liquid Applied Thermal Insulation and Corrosion Resistance Coatings

Nansulate® Industrial Coatings
The best solution for thermal insulation and protection from corrosion for pipes, tanks and industrial equipment and facilities.

Industrial customers report lowering energy use by 10%-25%

Nansulate® is an award winning patented clear thermal insulation solution that gives you the ability to perform visual inspections of your important assets while giving you the ultimate in corrosion protection and mold abatement.

Industrial customer
savings of $460,000
on energy bills.
Click for full case study

What is Nansulate®

Nansulate® coatings are a patented technology by Industrial Nanotech, Inc. that utilize a nanomaterial with an extremely low thermal conductivity. This material allows the coatings to effectively inhibit heat transfer in a thin layer.

Nansulate® is an advancement to the traditional concept of insulation, providing alternative solutions for sustainability and energy efficiency. A benefit of a thin film insulation is that the material does ot rely on thickness as a function of its insulating abilty, and thus compression does not reduce its effectiveness. Nansulate® also provides a health benefit by not harboring moisture, dust, mold or dirt, which are factors that reduce traditional insulation's effectivness over time and decrease air quality.

Environmentally Friendly Technology

You can feel good about using Nansulate® in your factory, home or office. It is a green product which not only reduces energy use, but is also low VOC.

Green Attributes:

>Reduces energy consumption
>Does not contain heavy metals
>Low VOC (100 g/L)
>Non-Flammable
>Non-Caustic
>No Asthmagens
>No Phosphates
>No Ozone-Depleting Compounds
>Non-Toxic

Read about Nansulate® in Processing Magazine

Choose the Nansulate® insulation coating below which best fits your needs.

Nansulate Translucent PT thermal insulation and corrosion prevention coating

Nansulate® Translucent PT
High Performance Protective Thermal Insulation & Corrosion Prevention Coating

Temperature Extremes: -40F to 257F (-40C to 125C)

Uses: Metal buildings, water pipes and pipelines, tanks, boat hulls, regrigerated trucks, metal panels, HVAC ductwork and more

Coverage Rate per Gallon:
450 S.F. @ 1 coat (each coat applied at 3-5 wet mils)
75 S.F. @ 6 coats (typical application)
Actual coverage rate may vary depending on surface texture.

PRICE:

$79.95 - 1 gallon
$399.75 - 5 gallon

plus shipping

55 gallon size also available. Call 800-767-3998 for volume discount information.

Nansulate Translucent High Heat thermal insulation and corrosion prevention coating

Nansulate® Translucent High Heat
High Performance Protective Thermal Insulation & Corrosion Prevention Coating

Temperature Extremes: -40F to 400F (-40C to 204C)

Uses: Steam pipes, boilers, heat exchangers, dyeing machines, industrial ovens, LNG burners, industrial dryers, processing tanks and more

Coverage Rate per Gallon:
450 S.F. @ 1 coat (each coat applied at 3-5 wet mils)
45 S.F. @ 10 coats (typical application)
Actual coverage rate may vary depending on surface texture.

PRICE:

$89.95 - 1 gallon
$449.75 - 5 gallon

plus shipping

55 gallon size also available. Call 800-767-3998 for volume discount information.

Nansulate® Translucent GP
High Performance Protective Thermal Insulation & Mold Resistance Coating

Temperature Extremes: -40F to 257F (-40C to 125C)

Uses: Building walls & ceilings, PVC pipes & ductwork, clean rooms, nursing homes, hospitals, restaurants, food processing equipment and more

Coverage Rate per Gallon:
450 S.F. @ 1 coat (each coat applied at 3-5 wet mils)
150 S.F. @ 3 coats (recommended minimum)
Actual coverage rate may vary depending on surface texture.

PRICE:

$79.95 - 1 gallon
$399.75 - 5 gallon

plus shipping

55 gallon size also available. Call 800-767-3998 for volume discount information.

Nansulate® EPX-4
(2-part Epoxy with flame resistance)
High Performance Water-based Epoxy system that provides Thermal insulation - Corrosion Resistance - Flame Resistance - Chemical Resistance

Temperature Extremes: -40F to 450F (-40C to 232C)

Uses: Pipes, boilers, steam pipes, underground pipelines, heat producing equipment and more

Coverage Rate per Gallon:
24 S.F. @ 1/8" thickness
Actual coverage rate may vary depending on surface texture.

PRICE:
(EPX is sold in either 2 gallon kit or 5 gallon kit sizes)

$270.00 - 2-gallon kit
$675.00 - 5-gallon kit

plus shipping

Call 800-767-3998 for volume discount information.

Request a Quote or Ask a Question

US & Canada: 800-767-3998
International: 1-239-254-0346
Fax: 1-239-254-1381

First Name*

Last Name*

Company

Phone*

E-Mail*

Comments/Questions:

Applications

	Pipe Insulation: Nansulate® thermal insulation provides excellent protection for industrial pipes and pipelines. Easy application offers savings from expensive installation costs - most companies find their own crews can apply Nansulate® themselves. Nansulate® offers protection against corrosion under insulation, while lowering surface temperature and creating a barrier to heat transfer. Eliminates costly corrosion under insulation (CUI) issues.
	Tank Insulation: Nansulate® can offer energy savings when used as tank insulation in a number of ways. It will insulate and protect against corrosion, as well as allow your tank process to run more effectively by keeping the heat inside. Our industrial coating also offers options for application to already hot tanks, allowing you less downtime for your hot processes.
	Food and Beverage: Nansulate® Translucent GP has received the NSF non-food compound registration, making it an idea product to use for insulating equipment used in food and beverage manufacturing. Nansulate®'s proven effectiveness not only saves energy use but also provides a more consistent insulation, making food and beverage heating processes more efficient.
	Industrial Equipment Insulation : Nansulate® Translucent High Heat is currently saving many textile factories between 10% to 20% in their monthly energy costs. Nansulate® offers a versatile insulation which can be sprayed or brushed into a variety of tight spaces, and can coat many different factory equipment parts, such as heat exchangers, boilers, steam pipes, industrial ovens and more.
	Duct Insulation: Create a more comfortable indoor environment, reduce the chance of air pollutants caused by mold and mildew, and save energy & lower fuel bills. Nansulate® will help prevent condensation, prevent rust, and will not trap mold and moisture.
	Wall Insulation: Nansulate® adheres directly to your surface in a thin layer. It will not trap mold or moisture within, thus helping to ensure your facility remains sanitary, while offering you the energy savings insulation provides. Nansulate® will block heat transfer, and offer protection from moisture build up, which also makes it an excellent companion product to increase the effectiveness of traditional insulation.
	Metal Building Insulation: Nansulate® thermal insulation allows you to insulate your metal storage, commercial and agricultural buildings without loss of space. Increase the energy efficiency of your heating and cooling unit by blocking heat transfer. Nansulate® protective coating is resistant to moisture, mold and mildew, and will not provide a nesting ground for rodents and other pests.

Dowload the Nansulate® Coating Catalogue:

Nansulate® is Patented technology protected by U.S. and international Patents.