Nansulate Thermal Insulation and Corrosion Resistance Coatings

Nansulate Application at Airport in Thailand

Industrial Testimonials

Cornwell Quality Tools

Application description: The product used was Nansulate Translucent GP. The application was done on windows where maintaining at least diffuse illumination from sunlight was a requirement along with thermal insulation.

"Sirs, We at Cornwell Tools have been very pleased with the results of using the Nansulate material as can be seen by the attached emails...

It's hard to quantify how much has been saved, but management has indicated over this winter so far we have saved approximately $30,000 in total heating costs. Many factors are involved in this, as other changes were also made (in addition to using Nansulate) such as moving the use of the overhead door in the steel room to the smaller overhead door in the inspection area, and adding a plastic screen at that door. However I believe that a considerable savings has been realized.

The cost of the (Nansulate) materials was probably saved in the first cold month."

Daniel Goodell
Senior Tool Designer
Cornwell Quality Tools
Mogadore, OH 44260, USA
Sales & Technical Consultant: NanoSynopsis, LLC

"We used Nanslate paint last year to paint a 5M(2) heated stainless steel tank which is positioned outdoors at a company in Cobden. This tank is used for melting butterfat. We achieved a measurable difference in the contents of this tank ... The outside of the tank was previously too hot to touch. With three coats of Nansulate applied, the touch was now warm to touch and there was a visual improvement to the melting efficiency of the product inside. We are very happy with the performance of Nansulate and intend on using it to paint future tanks."

David Morabito
Project Engineer
Ultraspin Technology Pty, Ltd
www.ultraspin.com.au

"Dear Sir, We wish to confirm that H H Robertson selected Nansulate™, for the coating the ceiling panels supplied to the air link bridges, at Suvanabhumi International airport, Bangkok.

H H Robertson pride themselves on supplying quality products to the construction industry. This means they work with quality suppliers and after a long and extensive investigation selected Nansulate™ over all other coating systems, because it was the only product that met our stringent technical requirements. Once of the key issues that induced H H Robertson to select Nansulate™, was that the suppliers were prepared to support the product with a warranty."