| |
Use this page to order online with our secure payment processing. Prices are in US dollars. Due to high demand, lead times may vary. If you have any questions about our products or application, please contact us by email for assistance or call our toll free number, 800-767-3998. Customer service is our #1 priority!
Pricing on this website reflects the U.S. pricing only. Pricing in other countries will vary.
All Nansulate® Coatings are low VOC and water-based.
International Orders: Industrial-Nanotech, Inc. welcomes International Orders. *Please note: We cannot accept credit card orders from the following countries: Afghanistan, Cuba, Czech Republic, Ghana, Indonesia, Iran, Iraq, Kuwait, Libya, Nigeria, North Korea, Republic of Georgia, Romania, Russia, Sudan, Syria. If you wish to place an order from one of these countries, a wire transfer is required in advance of shipment. Thank you.
Note: Products are sold by weight, not volume. Pricing reflects the U.S. retail price. Quantities desired can be adjusted in the shopping cart. All international orders are shipped duty unpaid. Duties are collected by the freight carrier upon delivery.
Buildings Application Handbook (Energy Protect, HomeProtect, LDX)
Large Industrial Application Handbook
Crystal Roof Application Handbook
EPX Application and Mixing Directions
Recommended Equipment Checklist
Use our Square Foot Calculator.
Get a Free Tshirt - Just tell us your Nansulate® story!
|
|
 |
Nansulate® HomeProtect Clear Coat
Residential Insulation Coating.
Exterior & Interior Use - Walls, Ceilings, Attics, Water Heaters. Mold & Moisture Resistant. Clear, smooth, matte finish.
$74.95 - 1 gallon
Covers 150 S.F. with 3-coats
$374.75 - 5 gallon
Covers 750 S.F. with 3-coats
plus shipping
|
Nansulate® Energy Protect™
Commercial Building Insulation Coating.
Exterior & Interior Use - Factory Windows, Walls, Ceilings, Ducts. Mold & Moisture Resistant. Clear, smooth, matte finish.
$79.95 - 1 gallon
Covers 150 S.F. with 3-coats
$399.75 - 5 gallon
Covers 750 S.F. with 3-coats
plus shipping
|
Nansulate® Crystal
Residential & Commercial Roof Coating. Clear protective roof insulation coating for sloped tile and shingle roofs. Mold & Moisture Resistant. Clear, smooth, matte finish.
Visit our mini-site for a fully-installed quote from one of our Contractor Referral Network professionals.
|
|
|
 |
 |
Nansulate® Translucent High Heat
Insulation & Corrosion Prevention Coating for Steam Pipes, Heat Exchangers, Valves, Boilers - Up to 400F/204C, Clear or Opaque, smooth, finish, depending upon surface temperature.
$89.95 - 1 gallon
Covers 45 S.F. with 10-coats
$449.75 - 5 gallon
Covers 225 S.F. with 10-coats
plus shipping
|
Nansulate® EPX
Insulation, Chemical and Flame Resistant Insulation Coating for Steam Pipes, Heat Exchangers, Valves, Boilers - Water-based 2-part Textured Epoxy System. Fast Cure. Thicker per coat coverage. Grey, pebbled finish.
Use EPX NanoPrime™ as a primer (4-coats).
$270.00 - 2 gallon kit
Covers 76 S.F. with 2-coats
$675.00 - 5 gallon kit
Covers 190 S.F. with 2-coats
plus shipping
|
EPX NanoPrime™
High Performance Water-based high temperature primer for use with Nansulate® EPX-4 that provides Thermal insulation - Corrosion Resistance - Excellent Adhesion. Each coat is applied at 4 mils/100 microns wet film thickness.
$89.95 - 1 gallon
Covers 112.5 S.F. with 4-coats
$449.75 - 5 gallon
Covers 562.5 S.F. with 4-coats
plus shipping
|
|
 |
 |
 |
Nansulate® Translucent PT
Insulation & Corrosion Prevention Coating for Pipes - Tanks - Ovens - Metal Surfaces - Up to 256F/125C, Direct-to-Metal Coating. Clear, smooth, matte finish.
$79.95 - 1 gallon
Covers 75 S.F. with 6-coats
$399.75 - 5 gallon
Covers 375 S.F. with 6-coats
plus shipping
|
Nansulate® Translucent GP-NSF
NSF registered for food manufacturing equipment and food sensitive areas, for use on pipes, vessels, ovens, cookers, tanks - up to 256F/125C. Mold & Moisture Resistant. Clear, smooth, matte finish.
$87.95 - 1 gallon
Covers 75 S.F. with 6-coats
$439.75 - 5 gallon
Covers 375 S.F. with 6-coats
plus shipping
|
Nansulate® LDX
Safe Lead Encapsulation Coating - use over lead contanimated surfaces - Brick, Lead-Based Paint, Concrete, Metal. Encapsulates for Lead Remediation of surfaces. Clear, smooth, matte finish.
$84.95 - 1 gallon
Covers 225 S.F. with 2-coats
$424.75 - 5 gallon
Covers 1,125 S.F. with 2-coats
plus shipping
|
|
 |
 |
 |
Nansulate® Solar
Thermal Insulation Coating for Solar Thermal Equipment - use for Flat Plate Collectors, Hot Water Heaters, Pipes - up to 400F/204C. Corrosion & Moisture Resistant. Clear, smooth, matte finish.
$89.95 - 1 gallon
Covers 75 S.F. with 6-coats
$449.75 - 5 gallon
Covers 375 S.F. with 6-coats
plus shipping
|
NanoBoost™
Thermal Insulation and Corrosion Prevention Coating for Automotive Part - for Fuel Efficiency and Cooler Automobile Interior - Use on Intake Manifold, Engine Compartment, Interior Roof - surfaces up to 400F/204C. Clear, smooth, matte finish.
$39.95 - 1 quart
Covers 19 S.F. with 6-coats
plus shipping
|
Nansulate® Cool Ride
Liquid heat shield coating for motorbike exhausts and mufflers to prevent burn injuries - Use on exhaust, muffler, and other hot surfaces up to 400F/204C to reduce the surface temperature for a safer ride. Use on Motorcycles, Motorbikes, ATV's and more. Clear/opaque, smooth, matte finish.
$39.95 - 1 quart
Covers 11.25 S.F. with 10-coats
plus shipping
|
|
 |
 |
 |
Nansulate® Bee Protect Clear
Protective Beehive Insulation and Mold Resistant Coating. Use over wood, plastic or pre-painted beehives to insulate and make environment more temperate. NSF Registered. Clear, smooth, matte finish.
$39.95 - quart
Covers 22.5 S.F. with 5-coats
$79.95 - 1 gallon
Covers 90 S.F. with 5-coats
$399.75 - 5 gallon
Covers 450 S.F. with 5-coats
plus shipping
|
Wet Film Thickness Gauge with Nansulate® Logo
Measure wet film thickness of your coating application. Mils is noted on one side and Microns on the other side.
$5.00 - each
plus shipping
|
PosiTest® DFT Coating Thickness Gage by DeFelkso
The PosiTest DFT Coating Thickness Gage measures the dry film thicknes of coatings on ALL metals. - measures both non-magnetic coatings on steel AND non-conductive coatings on aluminum, brass, and other metal surfaces. Microns & Mils.
$722.80 - each
Includes case, instructions, and calibration slips
plus shipping
|
|
 |
 |
|
Polypro Paint Mixer for drill - Quart/1-gallon size
Quart/Gallon Polypropylene-Molded Mixer with Galvanized Steel Rod by Homax.
-
Bottom portion of cage detaches to use with quart sized containers.
-
Excellent for use with most viscous fluids.
-
2-5/8" easy-to-clean, durable polypropylene cage.
-
1/4" solid core galvanized steel shaft.
-
10" overall length
-
Use with any variable speed drill.
$6.89 - each
plus shipping
|
Polypro Paint Mixer for drill - 5-gallon size
5 Gallon Polypropylene-Molded Mixer with Galvanized Steel Rod by Homax.
-
Safe to use, container friendly.
-
Excellent for use with most viscous fluids.
-
3-1/8" easy-to-clean, durable polypropylene cage.
-
5/16" solid core galvanized steel shaft.
-
19-3/8" overall length
-
Use with any variable speed drill.
$11.68 - each
plus shipping
|
|
| |
Get a Free Tshirt - Just tell us your Nansulate® story! |
| |
|
|
|
